Heymow - Lawnmower Racing Forum
Mower Building / Setup Help => Driveline => Topic started by: schmogz on September 01, 2009, 11:26:13 pm
-
just wondering if i could use the stock tranny sprocket with maybe a 33 or 35 tooth sprocket? any thoughts/suggestions?
-
on what, and on what??
-
im running a 99 craftsman with a 700 peerless and a 15.5 intek. not much motor work, port and polished head with a mikuni and arc flywheel. im not racing any time soon. just kind of a "get away from the wife" project. so cost effective is my big deal.
-
If your not racing, the stock gearing should be just fine...
Your wifes not that fast ...
-
I run 7.5 on crank 4 on tranny to stock on tranny 30 tooth on axle.
-
If your not racing, the stock gearing should be just fine...
Your wifes not that fast ...
Lol....
-
ill be runnin a 6 inch on the motor and a 4 inch on the tranny. cant really go any bigger on the motor. i built my own clutch modeled after the ec clutch but has bigger pulleys. my wife hates the mower so much that i dubbed it "the wifes nightmare" . thanks again everyone.