31
Briggs OHV & Vanguard / Re: 17 hp ohv briggs
« on: May 20, 2007, 10:13:05 pm »
Go with tractormans advice, he knows what he's talking about. 
Andrew
Andrew
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
32
Racing Mower Builds / Re: Let's Build an F/X..!!!
« on: May 20, 2007, 10:11:28 pm »
it looks like a good runner, but how does she do on the track?
Andrew
Andrew
33
Post your Pics! / Re: had to do a few more mods today
« on: May 20, 2007, 10:10:12 pm »
looks good, i like the exhaust, is that stainless or chrome?
Andrew
Andrew
34
Kohler Engines / Re: NEW MOWER!!!!!!!!!!!!!!!
« on: May 20, 2007, 10:05:30 pm »
Yeah, for the first 8-10" or so is 1" pipe from the header to the open space in the frame where the original muffler was. Thanks guys.
Andrew
Andrew
35
Briggs OHV & Vanguard / Re: few engine questions.
« on: May 20, 2007, 07:26:48 pm »
Greasemonkey, thanks for the pics, also removing the muffler will give you the sound you are looking for. More flow = more performance, kinda 
Andrew
Andrew
36
Kohler Engines / Re: NEW MOWER!!!!!!!!!!!!!!!
« on: May 20, 2007, 02:37:36 pm »
it will be a racer after i adapt a tranny and my axle.
Thats good to heat about the engine, currently i am running
32-35" of 2 1/2" exhaust, do you guys think thats enough?
i plan on running it under the right hand side floor board.
Andrew
Thats good to heat about the engine, currently i am running
32-35" of 2 1/2" exhaust, do you guys think thats enough?
i plan on running it under the right hand side floor board.
Andrew
37
Driveline / Re: Peerless 700 drive gear
« on: May 20, 2007, 02:29:25 pm »
go with the steel.
Andrew
Andrew
38
Driveline / Re: belt sliping
« on: May 20, 2007, 02:25:14 pm »
i use the belts that have the red kevlar on them, and i only replace
them once or twice a season, they are great.
Andrew
them once or twice a season, they are great.
Andrew
39
Driveline / Re: Gear oil
« on: May 20, 2007, 02:21:36 pm »
i use gearsaver motorcycle tranny oil.
Andrew
Andrew
44
Briggs OHV & Vanguard / Re: few engine questions.
« on: May 20, 2007, 02:07:54 pm »
If you want a deeper, rumblier sound, take squidds advice and go with larger diameter
exhaust, i run a 2.5" on my Kohler command 15HP, also explain your "custom" exhaust
one more time , if i read correctly, did you say that you welded muflers inside of them?
By the way you should have at least 22" - 28" depending on the bends you make, for sound, and
for rules/regulations(DEPENDING).
Andrew,
post pics too
exhaust, i run a 2.5" on my Kohler command 15HP, also explain your "custom" exhaust
one more time , if i read correctly, did you say that you welded muflers inside of them?
I made custom pipes on it. The go out straight, the have lawn mower mufflers welded in them. then the it curves around back...if so, why? As for as making it idle lower, your on your own....
By the way you should have at least 22" - 28" depending on the bends you make, for sound, and
for rules/regulations(DEPENDING).
Andrew,
post pics too
45
Driveline / Re: Tranny Questions
« on: May 19, 2007, 08:47:24 pm »
Thank you so much for the info, fortunatly the 600 was not what i had in
mind, but i know what your talking about.
Andrew
mind, but i know what your talking about.
Andrew