Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - ajgetz

Pages: [1]
1
Post your Pics! / Happy Birthday Rod
« on: August 24, 2007, 01:51:06 am »

2
Briggs OHV & Vanguard / Using plastigage on an Briggs 18hp IVS single engine
« on: August 21, 2007, 02:38:17 pm »
Hey George H. or someone that knows this.

Using plastigage what should the clearance be on the connecting rod at the crank shaft journal

This is using stock Briggs parts (Model: 31D777 Type: 0235E1 Code: 030327ZE)

Is it .002 but shoot for .003 clearance,  just like on the ARC rod as seen here:

http://www.heymow.com/index.php/topic,3229.0.html

Thanks
Andrew

3
Briggs Flathead / Briggs 808726 Starter NIPP. W solenoid
« on: August 12, 2007, 09:13:40 pm »
Hey George H. or anyone that knows this for sure

Will the Briggs 808726 Starter NIPP. W solenoid work with the stock fly wheel on the Briggs 12hp 28 engine or does this starter only work with the ARC billet fly wheels

Andrew

4
Post Your Video / 2007 TROY-BILT Canadian Nationals at Kawartha Speedway - www.oeltra.ca
« on: July 31, 2007, 01:32:28 pm »
I have uploaded a few videos from the nationals to the Oeltra youtube site.

http://www.youtube.com/profile_videos?user=oeltra

5
Briggs Flathead / Torque and Tightening : Billet Aluminum Flywheel for the 12hp 28 engine
« on: May 03, 2007, 11:27:45 am »
Hi George Herrin or someone who knows this for sure.

Is 100 ft. Lbs. the correct Torque specs for the Billet Aluminum Flywheel for the 12hp 28 engine?

Also is it safe to hold the crank from the bottom of the engine while tightening the Billet Aluminum Flywheel on? If not does anyone know if Briggs Flywheel Holder Tool 19321 or 19372 will work?

Andrew

6
Chassis / Steering Wheel Handle Bars Ends
« on: January 07, 2007, 07:05:09 pm »
Some racers have a steering wheel with handle bar ends on them? Are they using a bolt on Handle bar End or are they welded on. The problem with welding is most Kart wheels are made of Aluminum. If they are bolt on, any one know where to get them?

Andrew

7
Tires / Aluminum Split Rims (Rim Halves for Karts)
« on: January 03, 2007, 11:50:20 am »
Has anyone tried using the Aluminum Split Rims (Rim Halves for Karts)? I am wondering if they will hold up for Lawn Mower Racing. I am guessing the good thing about them is that they must be easy to mount tires on them. I see Arc Racing sells them as well.

Andrew

8
Post Your Video / OELTRA TROY-BILT CUP SERIES RACE VIDEO
« on: December 21, 2006, 02:21:27 pm »
I have uploaded a bunch of race video on youtube from the OELTRA TROY-BILT CUP SERIES. These videos are the full race of the class listed in the title.

Click the link below to view the list of video.

http://www.youtube.com/profile_videos?user=oeltra

Thanks for taking video at the races Sam Davison and Rick Rzezniczak

Andrew

9
Post your Pics! / AGS Racing 2006 Machine
« on: May 31, 2006, 11:45:34 am »
Here is a picture of my new 2006 machine at a race on Sunday that I went on to take the checkered flag

This class would be similar to the SP class in the USLMRA

Picture Credit goes to our new OELTRA member Rick Rzeznkzak.

Andrew
www.oeltra.ca
www.oeltra.proboards58.com


10
Briggs Flathead / Gas Tank Location when Using a Fuel Pump
« on: May 20, 2006, 10:11:23 am »
When using a vacuum pulse fuel pump on a Briggs 12hp engine, does the gas tank still need to be mounted higher than the carb or does the pump have enough power to pump it uphill if the tank is mounted lower than the carb on the chassis?

I am using Briggs Fuel Pump Part number# 808656

Andrew
www.oeltra.ca
http://www.oeltra.proboards58.com

11
Briggs Flathead / Starters HD W/O solenoid Part# 499521 VS HD Nippendenso
« on: April 17, 2006, 10:55:23 am »
I see there are two different starters and Don G. has them on his web site

Starter HD W/O solenoid Part# 499521
Starter HD Nippendenso With solenoid Part# 808726

Is the HD W/O solenoid Part# 499521 just as strong as the HD Nippendenso with solenoid Part# 808726 and do both work with a stock Briggs 12hp flywheel?

Andrew

12
Briggs Flathead / Offset keys for Briggs Single piston 12hp engine
« on: March 28, 2006, 06:06:10 pm »
Is the part number of 5995 on arc racings web site the correct part number to buy to off set the flywheel for a 12hp engine. It is listed for a 3hp engine

Does this work?

Andrew

13
Post your Pics! / New OELTRA Pace Tractor
« on: March 13, 2006, 01:29:13 pm »
New OELTRA Pace Tractor

Here is the first look at our new pace tractor that came from our new sponsor TROY-BILT

Andrew
www.oeltra.ca


Pages: [1]
anything