Heymow - Lawnmower Racing Forum
Engine Help => Briggs Flathead => Topic started by: Alliesman on November 13, 2018, 05:17:52 pm
-
i was gettong my project mower cleaned and pulled my carb off to de grease it and get the varnish off it. i happened to notice its odd design, and was wondering what kind it is?
-
i was gettong my project mower cleaned and pulled my carb off to de grease it and get the varnish off it. i happened to notice its odd design, and was wondering what kind it is?
-
An old flo-jet carb.
-
are these a good carb in general its nothing like a typical carb
-
Find a intake carb setup of a 12 HP mower. That would be a better carb.
-
this came off a 12hp
-
Find a 2 piece carb setup.
-
how hard are those to come by?
-
how hard are those to come by?
Harder to find, but not impossible.
-
here's another question , the air box rod how does it come out
-
how hard are those to come by?
I probably have a couple 2 piece setups with walbro lmt56 carbs
-
i have a 56 i think, that is stanped on the inside of the carb riht?
-
i have a 56 i think, that is stanped on the inside of the carb riht?
Correct.
-
whats the differance other than size