Topic: C120 GT Puller project begains

[KeithB078]

Got the frame cleaned up , primed and painted

This tractor will be from at least 3 different tractors.

The frame and tin work is a C-160 eight speed, the trans is 8 speed 8 pinion from a C-81, the motor is a 12 HP Kohler from a C-120 Auto.

The C-160 tranny has to be taken apart and get new seals at some time, it will be a spare or go in another tractor.

Maybe i should name it Frankenstein biggrin.gif

This one will be a stock 12HP class






some more progress





running , replaced the fuel line with new, took it out and drove it around

Still have to build wheelie bars and mid and front weight brackets, and more tin work

[goatmower]

looks beastly 

[gtpuller]

Nice Tractor:

[brandonmc]

My 5 year old son has a tractor just like that one that he rides around in the yard nice tractor

[KeithB078]

Thanks guys, still got some more painting. also plan to do some motor work, like a 18 HP OHV cam and shave the head

[FlatheadPuller]

Keith is that a hitch off ebay. If so how is its fitment. I am building a stock wheel horse for my son over the winter but with JD sheet metal. It will look like a 4020 from the early 70's when done. Our class is stock wheel base for chassis being used and stock engine on the governor at 4000 rpm.

[KeithB078]

it is off Ebay. it fits very well. Was like $33.00. i plan to weld 4 tabs to it to bolt alum wheelies bars to

[Tazz245]

What hp is the motor?

[Squidd]

This one will be a stock 12HP class

[Rooster]

"Will Be" or "Was" I would hope this 2 year old build is done by now!

[Burwell555]

Hard tellin, last time he was online was mid April!!