Author Topic: HELP!!!!!  (Read 1977 times)

0 Members and 1 Guest are viewing this topic.

Offline Tryin4423

  • Newbie
  • *
  • Posts: 72
  • Karma: 0
  • Gender: Male
    • View Profile
HELP!!!!!
« on: March 13, 2007, 05:41:50 pm »
Hey guys i need help i got my motor running and belts fixed for all that contributed to that thread thank you very much. now the problem is when i start my engine and try to turn the motor wants to die and when i let the clutch out it wants to die. Any suggestions or advise on the Steering thing would be most appreciated.
Thanks,
Tryin4423
\\\"When You Do It, You Gotta Look Cool.\\\"

Offline fox_racin4

  • Turf Warrior
  • **
  • Posts: 218
  • Karma: 4
    • View Profile
Re: HELP!!!!!
« Reply #1 on: March 13, 2007, 06:04:48 pm »
geard to high, or not giving it throttle when letting clutch out
#4 super modified
SOLTRA

Offline Squidd

  • Global Moderator
  • Highly Mowtivated
  • *****
  • Posts: 6906
  • Karma: 92
  • Gender: Male
    • View Profile
Re: HELP!!!!!
« Reply #2 on: March 13, 2007, 06:43:18 pm »
Quote
when i start my engine and try to turn the motor wants to die

So..are you saying the motor starts and runs....but when you turn the steering wheel, it dies..??

Sounds like cable too short and yanking on carb...

Quote
and when i let the clutch out it wants to die.

Sounds like not giving enough gas when letting clutch out...or geared too high..
Randy Stys
"Pull My Finger"
 63 Cub Cadet S/A

Offline Tryin4423

  • Newbie
  • *
  • Posts: 72
  • Karma: 0
  • Gender: Male
    • View Profile
Re: HELP!!!!!
« Reply #3 on: March 13, 2007, 08:07:31 pm »
Thanks squidd i figured the brake thing out which prolly might lead to the steering thing as well the small pulley in front of the huge pulley in the rear is all ate away due to belt being on rong rofl i feel like an idiot.
Thanks,
Tryin4423
\\\"When You Do It, You Gotta Look Cool.\\\"

Offline tgames64

  • Mow-Forum Junkie
  • ***
  • Posts: 1062
  • Karma: 14
  • Gender: Male
    • View Profile
Re: HELP!!!!!
« Reply #4 on: March 13, 2007, 08:36:24 pm »
I would do some more reading through the posts and you'll find a lot of useful info that will make your build go easier....
Like the old saying says..." Measure twice and cut once ".
Ted Ames
AKA, Cranky Ole Fart
www.sglmra.com

 

anything