After 2 years in the making, we now have a billet crank for the Model 28
Racer Price is $299.95. We have tried very hard to keep the price down to the racer while also keeping our dealers in mind. This crank starts out as a 80 58 lb piece of chromolly bar stock and we remove a little more than 70 51 lbs to finish at a slim and trim 9.6 9.5 lbs!
The crank is balanced right out of the box (no more brass counter weights or syncro-anything) and has been designed to clear the most radical Model 28 cam produced by Precision Cams. It is stock stroke and has the stock journal size, so you DO NOT have to buy a new rod if you already have an ARC 6280 rod. We will be getting undersized bearings for our 6280 rods, so this crank can be re-ground, giving it a better life-span.
This crank has been designed to fit the model 28 engine's sump cover. The crank will work in the model 31 as well, but you will have to install a bushing in the model 31 sump cover as was the case with the stock model 28 crank.
The cranks are in production right now and will begin shipping tomorrow 12/10/10. We should have it on our website shortly. Part number 6562-C